spec no: dsak7902 rev no: v.1 date: may/20/2010 page: 1 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011312 1.6x0.8x0.5mm bi-color surface mount led attention observe precautions for handling electrostatic discharge sensitive devices part number: APHB1608ZGSYKC green super bright yellow features z 1.6mmx0.8mm smt led, 0.5mm thickness. z compatible with reflow soldering z available in various color combination z package: 2000pcs / reel . z moisture sensitivity level : level 3. z rohs compliant. description the green source color devices are made with ingan on sapphire light emitting diode. the super bright yellow device is made with algainp (on gaas substrate) light emitting diode chip. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsak7902 rev no: v.1 date: may/20/2010 page: 2 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011312 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APHB1608ZGSYKC green (ingan) water clear 180 350 super bright yellow (algainp) 70 180 130 symbol parameter device typ. max. units test conditions peak peak wavelength green super bright yellow 515 590 nm i f =20ma d [1] dominant wavelength green super bright yellow 525 590 nm i f =20ma ? 1/2 spectral line half-width green super bright yellow 30 20 nm i f =20ma c capacitance green super bright yellow 45 20 pf v f =0v;f=1mhz v f [2] forward voltage green super bright yellow 3.3 2 4.1 2.5 v i f =20ma i r reverse current green super bright yellow 50 10 ua v r = 5v parameter green super bright yellow units power dissipation 102.5 75 mw dc forward current 25 30 ma peak forward current [1] 150 175 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsak7902 rev no: v.1 date: may/20/2010 page: 3 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011312 APHB1608ZGSYKC green
spec no: dsak7902 rev no: v.1 date: may/20/2010 page: 4 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011312 super bright yellow
spec no: dsak7902 rev no: v.1 date: may/20/2010 page: 5 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011312 APHB1608ZGSYKC reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsak7902 rev no: v.1 date: may/20/2010 page: 6 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011312 packing & label specifications APHB1608ZGSYKC
|
